|
Fiberglass Pool Gelcoat
Swimming Pools
- Hot tubs - Spa's
Gelcoat
Even the best pools in the world need
refinishing after about twenty years. Some fiberglass pool owners have used
paint or epoxy in an attempt to restore their swimming pools.
Rubber based paint or 2 part epoxy are not made for
fiberglass pools, spa's, or hot tubs, and they don't work
well.
Now,
pool owners can restore their pool to
it's original beauty and stain free condition with
Fibre-Shelkote™ gelcoat, made for fiberglass
swimming pools, spas, Jacuzzis, and hot tubs.
Gelcoat was the original finish on every fiberglass swimming
pool when it was manufactured at the factory. High quality
gelcoat is used by every fiberglass pool manufacturer
for long lasting beauty. Gelcoat provides a hard, bright,
non-porous finish, which protects the resins and fiberglass.
When
the gelcoat loses its ability to protect the fiberglass, it
begins to blister and stain. Fiberglass swimming pool
manufacturers neglect to mention this aspect of maintenance when
you buy the pool. Nevertheless, it will eventually happen to
every fiberglass pool The better the pool (usually
more expensive), the longer it takes before
resurfacing is necessary. Be sure to read
Swimming pool preparation and gelcoat application
instructions.
Do It Yourself and Save Thousands
of Dollars
All you need to do is remove the existing gelcoat, do
any patching necessary by following our instructions, wash the
area with solvent, then roll two new coats of Fibre-Shelkote
gelcoat on the pool. Upon completion, the pool will look like
it's brand new and be stain-free and leak-free once again.
Most fiberglass repairs can be completed in 1 day.
Call today for
the exact cost to repair your fiberglass swimming pool. We ship
everywhere in North America and the Caribbean.
Fiberglass Pool Repairs
A web site of UGlassIt
Pool Resurfacing, Inc.
Huntingdon Valley, PA
Toll Free 800-830-0501
[Pool Repair Home] [Gelcoat]
[Serious Damage] [ Prices] [Application]
[Contact Us]
Copyright © 2003-2007 All rights reserved |